Performing karate is an incredible way to learn self-defense, strengthen your body, and focus on your inner balance. However, tying the belt correctly can be a little intimidating if you’re just beginning. While using both sides to knot your belt is the most common direction, there are a few varied ways to tie a karate belt. If you’re confused, you should inquire with the instructor at your particular school. You can use both sides to knot your belt for a wraparound look, or just use the left side to knot for a cleaner, sharper line.
Method 1: Using Both Sides to Knot
Step 1
Fold the belt precisely in half to find the center. Hold your belt out in the beginning and
match the finishes together, so they’re even. Drive your hands along the size of your belt to smooth it out before you start.
White belts will always have a tag on one end of the belt. Your belts won’t have a tag anymore as you increase in colors.
Step 2
Place the center of the belt at your navel. Open the strap, so it’s in one long line again, maintaining your hands on the center. Drape the belt around your stomach, spotting the center directly on your belly button. Ensure that both belt angles are even, so you know it’s placed correctly.
If you can’t tell if your belt is even, try standing in front of a mirror to double-check.
Step 3
Wrap the two edges around your waist and back to the front. As you get the ends of the belt around to your back. Switch hands, so you’re now keeping up the opposite ends. Strike them over each other behind you, then bring the two lots back around to your front.
This part can be a little tricky, particularly if you’re just starting. Don’t give up!
Make sure the edges are still even in front of you.
Step 4
Overlap the ends on top of each other on your stomach. Pick one end and fold it over the center, organizing it on the belt over your stomach. Do the same thing to the other end so that they’re crossed over each other rapidly over your belly button.
If there are any crinkles in your belt, smooth them out, so it’s flat.
Step 5
Fold the top edge bottom of all the coverings of the belt. Put up with the end of the belt that’s on the very top. Pull it underneath all the coatings of your belt. Grab the end you just snatched underneath and pull it up towards you quickly against your stomach to create a small knot.
Make sure this knot is tight against your waist but not so tight that you can’t walk around or breathe.
If the ends of the belt are unequal, slide your belt around on your waist to cure it before you move on.
Step 6
Fold the bottom end underneath the top end to tie a knot. Grab the end of the belt that’s sticking out from underneath all layers. And cross it under the top end. Pull the lowest end up through the inner cross you built, then pull the bottom end up to tighten the knot. Make sure the ends are dangling evenly.
If your belt is too tight, you can adjust it by unlocking the last knot you just made.
Make sure your ultimate knot sits directly over your belly button.
Method 2: Using the Left Side to Knot
Step 1
Place the belt on your stomach, maintaining the left side longer than the right. Hold the belt up in front of your belly button, but only flee about 1 forearm’s length of stretch on the right side. Keep the left side super lengthy to work with later.
The right angle won’t move much throughout the tying process, so keep a good grip on it.
Step 2
Wrap the left end of the belt around yourself double. Holding the right back in place, coat the left side around you formerly, then wrap it around again. Tuck the right end of the belt underneath the left end as you cover to hold it in place. If your belt is short, you may be eligible to only wrap it around once.
Draping the belt behind you rather than crossing it overbuilds a flatter, smoother line in the back.
Step 3
Slide both ends to the center of your belly button. Grab both edges of your belt and pull them over until they’re both centered over your naval. If the sides are unequal, slide your belt around on your waist until they’re both the same size.
You don’t want to undo your belt to do this, so try to just shimmy it rather than take it off.
Step 4
Carry the longer end bottom of all the layers of the belt. Grab the end of the belt that you draped around your body. Push it up under all of the layers of the belt on your stomach. Grab it up through the coats, then pull it tight to make a loose knot.
Step 5
Fold the bottom end underneath the top edge to tie a knot. Snatch the bottom end of the belt, or the right side, and cross it underneath the leading edge out in front of you. Pull the bottom end up through the center of the cross, then pull the bottom end up to make a knot. Make sure the edges are hanging evenly.
You can untie the knot if you desire to by grabbing the center and grabbing it apart.
Conclusion
Here is some method with a step-by-step chart that will assist you in tying the belt. These methods will help you get used to tie a karate belt, taekwondo belt, jiu-jitsu belt, or most other martial arts belts. If you are a beginner, then you just need good practice so that you will be a pro from time to time.